Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
Cruise Control. Land Cruiser. Urj200, 202 Grj200 Vdj200
CHECK DTC OUTPUT (LANE DEPARTURE ALERT SYSTEM)
REPLACE FORWARD RECOGNITION CAMERA
DTC C1AA0 Front Camera Module Circuit |
DESCRIPTION
When an internal malfunction is detected in the forward recognition camera, DTC C1AA0 is stored.| DTC No. | DTC Detection Condition | Trouble Area |
| C1AA0 | 2 seconds after the engine switch is turned on (IG), the forward recognition camera detects an internal malfunction. | Forward recognition camera |
INSPECTION PROCEDURE
- NOTICE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
- If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera learning (Click here).
| 1.CHECK DTC OUTPUT (LANE DEPARTURE ALERT SYSTEM) |
Check if the stored DTCs are current DTCs.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / LKA/LDA / Trouble Codes
Check for DTCs (Click here).
| Result | Proceed to |
| DTC C1AA0 is output | A |
| DTC C1AA0 is not output | B |
|
| ||||
| A | |
| 2.REPLACE FORWARD RECOGNITION CAMERA |
Replace the forward recognition camera (Click here).
Adjust the forward recognition camera (Click here).
| NEXT | ||
| ||