Starter Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Starting. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL STARTER ASSEMBLY

  2. INSTALL EGR COOLER INSULATOR (w/ EGR System)

  3. INSTALL FUEL COOLER ASSEMBLY (w/o DPF)

  4. INSTALL EGR VALVE ASSEMBLY (w/ DPF)

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter -- Installation


NOTICE:
  1. When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.
  2. w/ DPF
    When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines (Click here).


1. INSTALL STARTER ASSEMBLY

  1. Install the starter with the 2 bolts.

    Torque:
    80 N*m{816 kgf*cm, 59 ft.*lbf}


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Starter Installation

  1. Connect the 2 starter hoses.

    Text in Illustration
    *1
    		Yellow Mark

  1. Attach the harness clamp and connect the wire harness.

  1. Connect the starter wire with the nut.

    Torque:
    21 N*m{215 kgf*cm, 16 ft.*lbf}

  1. Connect the starter connector.



2. INSTALL EGR COOLER INSULATOR (w/ EGR System)


3. INSTALL FUEL COOLER ASSEMBLY (w/o DPF)
(Click here)


4. INSTALL EGR VALVE ASSEMBLY (w/ DPF)
(Click here)


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).