Glow Plug Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Starting. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL GLOW PLUG ASSEMBLY

  2. INSTALL NO. 1 GLOW PLUG CONNECTOR

  3. INSTALL INJECTION PIPES

  4. INSTALL INTERCOOLER ASSEMBLY (w/ Intercooler)

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Glow Plug -- Installation


NOTICE:
  1. When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.
  2. w/DPF
    When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines (Click here).


1. INSTALL GLOW PLUG ASSEMBLY

  1. Clean the glow plug and glow plug hole.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Glow Plug Installation

  1. Apply adhesive to 3 or more thread roots in the area shown in the illustration.

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
    Text in Illustration
    *a
    		12 Thread Roots

  1. Using a 10 mm deep socket wrench, install the 8 glow plugs.

    Torque:
    12 N*m{125 kgf*cm, 9 ft.*lbf}


2. INSTALL NO. 1 GLOW PLUG CONNECTOR

  1. Install the 2 glow plug connectors by uniformly tightening the 8 nuts.

    Torque:
    2.2 N*m{22 kgf*cm, 19 in.*lbf}

  1. Install the 8 screw grommets.

  1. Connect the 2 wire harnesses with the 2 nuts and 2 screw grommets.

    Torque:
    4.0 N*m{41 kgf*cm, 35 in.*lbf}


3. INSTALL INJECTION PIPES
(Click here)


4. INSTALL INTERCOOLER ASSEMBLY (w/ Intercooler)
(Click here)


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).