Oil Level Sensor Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Lubrication. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

  4. REMOVE NO. 2 ENGINE UNDER COVER

  5. DRAIN ENGINE OIL

  6. DISCONNECT OIL COOLER PIPE ASSEMBLY

  7. REMOVE ENGINE OIL LEVEL SENSOR

Oil Level Sensor -- Removal



1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 bolts and screw.

  1. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.



2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 bolts and 2 screws.

  1. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.



3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 10 bolts and No. 1 engine under cover.



4. REMOVE NO. 2 ENGINE UNDER COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts and No. 2 engine under cover.



5. DRAIN ENGINE OIL

  1. Remove the oil filler cap.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts and No. 2 engine under cover seal.

  1. Remove the oil pan drain plug and gasket, and drain the engine oil into a container.

  1. Install a new gasket and the oil pan drain plug.

    Torque:
    40 N*m{408 kgf*cm, 30 ft.*lbf}


6. DISCONNECT OIL COOLER PIPE ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts and disconnect the oil cooler pipe.



7. REMOVE ENGINE OIL LEVEL SENSOR

  1. Disconnect the oil level sensor connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 bolts and oil level sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.3Ur-Fe Lubrication.Lubrication System.Oil Level Sensor Removal

  1. Text in Illustration
    *1
    		Cutting Position
    *2
    		Supply Part
    Cut off the gasket as shown in the illustration.

  1. Remove the gasket from the oil level sensor.

    HINT:
    After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.