Thermostat Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Cooling. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

Thermostat -- Inspection



1. INSPECT WATER INLET SUB-ASSEMBLY WITH THERMOSTAT


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
The valve opening temperature is stamped on the water inlet with thermostat.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Immerse the water inlet with thermostat in water and gradually heat the water.

  1. Check the valve opening temperature.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)
    If the valve opening temperature is not within the specified range, replace the water inlet with thermostat.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.3Ur-Fe Cooling.Cooling System.Thermostat Inspection

  1. Check the valve lift.

    Standard valve lift:
    10.0 mm (0.394 in.) or more at 95°C (203°F)
    Text in Illustration
    *1
    		Valve Lift
    If the valve lift is not as specified, replace the water inlet with thermostat.

  1. Check that the valve is fully closed when the water inlet with thermostat is at a low temperature (below 77°C (171°F)).
    If it is not fully closed, replace the water inlet with thermostat.