Exhaust Gas Temperature Sensor (For Dpf) Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Emission Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2)

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1)

  3. INSTALL EXHAUST GAS TEMPERATURE SENSOR

  4. INSTALL MONOLITHIC CONVERTER ASSEMBLY

  5. INSTALL NO. 4 EXHAUST GAS TEMPERATURE SENSOR

  6. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY

Exhaust Gas Temperature Sensor (For Dpf) -- Installation



1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2)
NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

    Torque:
    30 N*m{306 kgf*cm, 22 ft.*lbf}
    NOTICE:
    Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).
    HINT:
    The identification tape on the exhaust gas temperature sensor is gray.


2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1)
NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.

    Torque:
    30 N*m{306 kgf*cm, 22 ft.*lbf}
    NOTICE:
    Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).
    HINT:
    The identification tape on the exhaust gas temperature sensor is white.


3. INSTALL EXHAUST GAS TEMPERATURE SENSOR
NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, install the 2 exhaust gas temperature sensors.

    Torque:
    30 N*m{306 kgf*cm, 22 ft.*lbf}
    NOTICE:
    Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).
    HINT:
    The identification tape on the exhaust gas temperature sensor is pink.


4. INSTALL MONOLITHIC CONVERTER ASSEMBLY
(Click here)


5. INSTALL NO. 4 EXHAUST GAS TEMPERATURE SENSOR
NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, install the 2 No. 4 exhaust gas temperature sensors.

    Torque:
    30 N*m{306 kgf*cm, 22 ft.*lbf}
    NOTICE:
    Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).
    HINT:
    The identification tape on the exhaust gas temperature sensor is gold.


6. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY
(Click here)