Canister Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Emission Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT CHARCOAL CANISTER

  2. CLEAN FILTER IN CANISTER

Canister -- Inspection



1. INSPECT CHARCOAL CANISTER


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Gr-Fe Emission Control.Emission Control System (W/ Secondary Air Injection System).Canister Inspection

  1. Visually check the canister for cracks or damage.

  1. Blow compressed air of 4.9 kPa (50 gf/cm2, 0.71 psi) into port A and check that air flows without resistance from port B and port C.
    If the result is not as specified, replace the canister.

  1. Apply a vacuum of 1.96 kPa (20 gf/cm2, 0.28 psi) to port A. Check that the vacuum does not decrease when ports B and C are closed, and check that the vacuum does not decrease when port B is released.
    If the result is not as specified, replace the canister.



2. CLEAN FILTER IN CANISTER


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Gr-Fe Emission Control.Emission Control System (W/ Secondary Air Injection System).Canister Inspection

  1. Clean the filter by blowing compressed air of 4.9 kPa (50 gf/cm2, 0.71 psi) into port A while holding port B closed.

    NOTICE:
    Do not attempt to wash the canister.