Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200
REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)
REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)
Fuel Sender Gauge Assembly (For Fuel Sub Tank) -- Removal |
| 1. PRECAUTION |
- NOTICE:
- After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3. REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side) |
| 4. REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side) |
| 5. REMOVE REAR NO. 2 SEAT ASSEMBLY |
for Face to Face Seat Type:
Remove the rear No. 2 seat assembly (Click here).
except Face to Face Seat Type:
Remove the rear No. 2 seat assembly (Click here).
| 6. REMOVE REAR FLOOR MAT ASSEMBLY |
 |
Detach the 5 clips and fold back the floor mat toward the front of the vehicle.
- HINT:
- Fold back the floor mat so that the rear No. 7 air duct can be removed.
| 7. REMOVE REAR NO. 7 AIR DUCT |
Detach the 4 clips and remove the air duct.
 |
| 8. REMOVE REAR FLOOR SERVICE HOLE COVER |
 |
| 9. REMOVE FUEL SENDER GAUGE ASSEMBLY |
Disconnect the sender gauge connector.
 |
Remove the 5 screws and sender gauge.
- NOTICE:
- Be careful not to bend the arm of the fuel sender gauge.
Remove the gasket from the sender gauge.