Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Ur-Fe Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200
INSTALL REAR NO. 7 AIR DUCT (w/ Rear Air Conditioning System)
REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)
REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)
Fuel Sender Gauge Assembly (For Fuel Sub Tank) -- Installation |
| 1. INSTALL FUEL SENDER GAUGE ASSEMBLY |
Install a new gasket to the fuel sender gauge assembly.
Install the fuel sender gauge assembly with the 5 screws.
- Torque:
- 1.5 N*m{15 kgf*cm, 13 in.*lbf}
- NOTICE:
- Be careful not to bend the arm of the fuel sender gauge assembly.
Connect the fuel sender gauge connector.
| 2. INSTALL REAR FLOOR SERVICE HOLE COVER |
Install the rear floor service hole cover with new butyl tape.
| 3. INSTALL REAR NO. 7 AIR DUCT (w/ Rear Air Conditioning System) |
Attach the 4 clips to install the rear No. 7 air duct.
- HINT:
- Attach the clips in the order shown in the illustration.
 |
| 4. INSTALL REAR FLOOR MAT ASSEMBLY |
Attach the 5 clips to install the floor mat assembly.
| 5. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH |
- w/ Sliding Roof (Click here)
- w/o Sliding Roof (Click here)
| 6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH |
- w/ Sliding Roof (Click here)
- w/o Sliding Roof (Click here)
| 7. REMOVE REAR NO. 2 SEAT ASSEMBLY |
- for Face to Face Seat Type (Click here)
- except Face to Face Seat Type (Click here)
| 8. REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side) |
| 9. REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side) |
| 10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).