Fuel Pump (For Double Tank Type) Disassembly

Disconnect the fuel sender gauge connector.

Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.

Text in Illustration

	Press Down
	Slide

Disconnect the fuel pump connector.

Disconnect the jet pump (labeled A) from the sub-tank.

Disconnect the jet pump (labeled B) from the sub-tank.

1. Using a small screwdriver, detach the claw from the sub-tank.
   

   HINT:

   Tape the screwdriver tip before use.

Using a screwdriver, detach the 3 claws from the claw holes.

NOTICE:

Do not damage the fuel sub-tank.

HINT:

Tape the screwdriver tip before use.

Using a screwdriver, detach the 3 claws from the claw holes.

NOTICE:

Do not damage the fuel sub-tank.

HINT:

Tape the screwdriver tip before use.

Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.

HINT:

Tape the screwdriver tip before use.

Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

Remove the O-ring and spacer from the fuel pump.

Remove the fuel main valve from the fuel filter case.

Remove the 2 O-rings from the fuel main valve.

Detach the 2 claws from the claw holes to remove the fuel suction support.