Fuel Pressure Pulsation Damper Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DISCHARGE FUEL SYSTEM PRESSURE

  2. PRECAUTION

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  4. REMOVE INTAKE AIR SURGE TANK

  5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY

Fuel Pressure Pulsation Damper -- Removal



1. DISCHARGE FUEL SYSTEM PRESSURE
(Click here)


2. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


4. REMOVE INTAKE AIR SURGE TANK
(Click here)


5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the fuel pressure regulator holder.

  1. Pull the fuel pressure pulsation damper out of the fuel delivery pipe.

  1. Remove the O-ring from the fuel pressure pulsation damper.