Front Crankshaft Oil Seal Installation

Apply MP grease to the lip of a new front crankshaft oil seal.

NOTICE:

1. Do not allow foreign matter to contact the lip of the oil seal.
   
2. Do not allow MP grease to contact the dust seal.
   

Using SST and a hammer, tap in the front crankshaft oil seal to a depth between 0 and 1.0 mm (0 to 0.0394 in.) from the timing chain cover edge.

SST

09223-22010
09506-35010

NOTICE:

1. Keep the lip free from foreign matter.
   
2. Do not tap the front crankshaft oil seal at an angle.
   

Install the crankshaft timing gear key to the crankshaft.

Align the key groove of the pulley with the pulley set key, and slide on the pulley to install it.

Using SST, install the pulley set bolt.

SST

09213-70011
09330-00021

Torque:

300 N*m{3059 kgf*cm, 221 ft.*lbf}

Text in Illustration

*a	Hold
	Turn