Ecd System (W/O Dpf) Precaution

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INITIALIZATION AND REGISTRATION

  1. FUEL INJECTOR COMPENSATION CODE

  1. FOR USING GTS

  1. IGNITION SWITCH EXPRESSION

Ecd System (W/O Dpf) -- Precaution



1.INITIALIZATION AND REGISTRATION
NOTICE:
When replacing the ECM and/or any other components in the following chart, perform the corresponding utility items.
HINT:
When the ECM and one or more other components are replaced at the same time, perform the following utility items by following the instructions shown on the GTS display, starting with the ECM.

Replacement Part
Utility Item
ECM
  1. Learning Values Save (Click here)
  2. Learning Values Write (Click here)
  3. Input Injector Compensation Code (Click here)
Engine assembly
Input Injector Compensation Code (Click here)
Fuel supply pump assembly
Supply Pump Initialization (Click here)
Injector assembly
Input Injector Compensation Code (Click here)

2.FUEL INJECTOR COMPENSATION CODE

  1. Each fuel injector has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each fuel injector according to its compensation code. Fuel injector compensation codes are unique, 30 digit, alphanumeric values printed on the head portion of each fuel injector.



    2. Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Engine Control.Ecd System (W/ Dpf).Ecd System (W/O Dpf) Precaution

  2. When a fuel injector is replaced, the new fuel injector compensation code must be input into the ECM.

  3. When the ECM is changed, all of the existing fuel injector compensation codes must be input into the new ECM.

  4. If an incorrect fuel injector compensation code is input into the ECM, the engine assembly may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened.


3.FOR USING GTS
CAUTION:
  1. Observe the following items for safety reasons:
    1. Before using the GTS, read its instruction manual.
    2. Prevent the EGR cable from being caught on the pedals, shift lever or steering wheel when driving with the EGR connected to the vehicle.
    3. When driving the vehicle for testing purposes using the EGR, two persons are required. One person drives the vehicle, and the other operates the EGR.

4.IGNITION SWITCH EXPRESSION

HINT:
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression
Ignition Switch (position)
Engine Switch (condition)
Ignition Switch off
Off
Off
Ignition Switch ON
ON
On (IG)
Ignition Switch ACC
ACC
On (ACC)
Engine Start
START
Start