Accelerator Pedal Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Accelerator Pedal -- Installation



1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY
NOTICE:
  1. This accelerator pedal does not require lubrication.
    Do not apply oil or other lubrication to the accelerator pedal sensor assembly.
    If applied, the accelerator pedal sensor assembly must be replaced.
  2. Avoid physical shocks to the accelerator pedal sensor assembly.
  3. Do not disassemble the accelerator pedal sensor assembly.

  1. Install the accelerator pedal sensor with the 2 nuts.

    Torque:
    5.4 N*m{55 kgf*cm, 48 in.*lbf}

  1. Connect the accelerator pedal position sensor connector.



2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Engine Control.Sfi System.Accelerator Pedal Installation

  1. Connect the connector.

  1. Attach the 3 claws to install the No. 1 instrument panel under cover sub-assembly.

  1. Install the 2 screws <A>.

    Text in Illustration
    *a
    		Screw <A>