Accelerator Pedal On-Vehicle Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

Accelerator Pedal -- On-Vehicle Inspection



1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the intelligent tester on.

  1. Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accel Sens. No. 1 Volt % and Accel Sens. No. 2 Volt %.

  1. Read the value displayed on the intelligent tester.

    Standard Value:
    Tester Display
    		Condition
    		Specified Condition
    Accel Sens. No.1 Volt %
    		Released
    		10 to 22%
    Depressed
    		54 to 86%
    Accel Sens. No.2 Volt %
    		Released
    		12 to 42%
    Depressed
    		66 to 98%
    If the result is not as specified, check the accelerator pedal, wire harness or ECM.