Dtc P060B Internal Control Module A/D Processing Performance

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CHECK FOR DTC

DTC P060B Internal Control Module A/D Processing Performance


DESCRIPTION

This DTC is stored when a communication error occurs in the ECM.

DTC No.
DTC Detection Condition
Trouble Area
P060B
There is an ECM main CPU communication error (1 trip detection logic).
  1. ECM
  2. Knock sensor

INSPECTION PROCEDURE

1.CHECK FOR DTC

  1. Connect the GTS to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the GTS on.

  1. Clear the DTCs (Click here).

  1. Turn the GTS off.

  1. Turn the ignition switch off.

  1. Disconnect the GTS.

  1. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

  1. Connect the cable to the negative (-) battery terminal.

  1. Connect the GTS to the DLC3.

  1. Turn the ignition switch to ON and turn the GTS on.

  1. Wait 16 seconds or more.

  1. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

  1. Check for DTCs.

    Result
    Result
    		Proceed to
    DTC is not output
    		A
    DTC P060B is output
    		B
    DTC P060B and P0327 or P0328 are output
    		C

    OK:
    P060B is not output.


B
REPLACE ECM (Click here)

C
GO TO DTC P0327, P0328, P0332 OR P0333 (Click here)
A

CHECK FOR INTERMITTENT PROBLEMS (Click here)