Датчик Положения Коленчатого Вала Проверка


  1. INSPECT CRANKSHAFT POSITION SENSOR

Датчик Положения Коленчатого Вала -- Проверка



1. INSPECT CRANKSHAFT POSITION SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Cold
    19 to 32 Ω
    1 - 2
    Hot
    24 to 37 Ω
    ПРИМЕЧАНИЕ:
    In the chart above, the terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).
    If the result is not as specified, replace the crankshaft position sensor.