Fuel Lid Lock Control Cable Assembly (For Extra Cab) Removal

Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Door Hatch. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. REMOVE FRONT SEAT ASSEMBLY LH

  2. REMOVE FRONT SEAT ASSEMBLY RH

  3. REMOVE CONSOLE BOX ASSEMBLY

  4. REMOVE REAR SEAT CUSHION ASSEMBLY LH (w/ Seat Cushion)

  5. REMOVE REAR SEAT CUSHION ASSEMBLY RH (w/ Seat Cushion)

  6. REMOVE UPPER BACK PANEL GARNISH

  7. REMOVE REAR SEATBACK ASSEMBLY

  8. REMOVE LOWER BACK PANEL GARNISH

  9. REMOVE FRONT DOOR SCUFF PLATE LH

  10. REMOVE COWL SIDE TRIM BOARD LH

  11. REMOVE QUARTER INSIDE TRIM BOARD LH

  12. REMOVE FRONT FLOOR CARPET ASSEMBLY

  13. REMOVE REAR NO. 1 WHEEL OPENING EXTENSION SUB-ASSEMBLY LH (w/ Over Fender)

  14. REMOVE REAR WHEEL HOUSE LINER LH

  15. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

  16. REMOVE FUEL FILLER OPENING LID LOCK RETAINER

Fuel Lid Lock Control Cable Assembly (For Extra Cab) -- Removal



1. REMOVE FRONT SEAT ASSEMBLY LH
(HILUX_TGN26 RM000000Z8U08XX.html)


2. REMOVE FRONT SEAT ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.


3. REMOVE CONSOLE BOX ASSEMBLY
(HILUX_TGN26 RM000003NEC00QX.html)


4. REMOVE REAR SEAT CUSHION ASSEMBLY LH (w/ Seat Cushion)


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Operate the rear seat cushion lock hook release lever and pull up the rear seat cushion assembly LH to detach the hook.

    Text in Illustration
    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
    		Pull Up
    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
    		Release


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 2 hooks and rear seat cushion assembly LH.



5. REMOVE REAR SEAT CUSHION ASSEMBLY RH (w/ Seat Cushion)
HINT:
Use the same procedures described for the LH side.


6. REMOVE UPPER BACK PANEL GARNISH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 4 claws and 5 clips and remove the upper back panel garnish.



7. REMOVE REAR SEATBACK ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 2 bolts.

  1. Lift up the rear seatback assembly in the direction indicated by the arrow to detach the 2 hooks from the vehicle body. Then remove the rear seatback assembly.

    NOTICE:
    Be careful not to damage the vehicle body.


8. REMOVE LOWER BACK PANEL GARNISH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 6 claws, 2 guides and 5 clips and remove the lower back panel garnish.



9. REMOVE FRONT DOOR SCUFF PLATE LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For Extra Cab) Removal

  1. Put protective tape around the front door scuff plate.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 4 clips and 8 claws and remove the front door scuff plate.



10. REMOVE COWL SIDE TRIM BOARD LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the part of the front door opening trim attached to the cowl side trim board.

  1. Remove the clip.

  1. Detach the 2 clips and remove the cowl side trim board.



11. REMOVE QUARTER INSIDE TRIM BOARD LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the bolt and disconnect the front seat outer belt floor anchor.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the part of the front door opening trim attached to the quarter inside trim board.

  1. Detach the 4 claws, 3 guides and 7 clips and remove the quarter inside trim board.



12. REMOVE FRONT FLOOR CARPET ASSEMBLY

  1. Partially remove the floor carpet.

    HINT:
    It is not necessary to fully remove the floor carpet. Partially remove it so that the lock control cable can be removed in a later step.


13. REMOVE REAR NO. 1 WHEEL OPENING EXTENSION SUB-ASSEMBLY LH (w/ Over Fender)


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For Extra Cab) Removal

  1. Put protective tape around the rear No. 1 wheel opening extension.

    Text in Illustration
    *1
    		Protective Tape

  1. Remove the 5 screws.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 11 clips and remove the No. 1 rear wheel opening extension.

  1. Remove the 11 clips from the vehicle body.



14. REMOVE REAR WHEEL HOUSE LINER LH

  1. Partially remove the liner.

    HINT:
    It is not necessary to fully remove the liner. Partially remove it so that the lock control cable can be removed in a later step.


15. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

  1. Remove the fuel lid lock open lever.

  1. Remove the grommet from the vehicle body.



  1. Detach the cable from the clamps shown in the illustration.


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For Extra Cab) Removal


    Text in Illustration
    *1
    		Fuel Lid Lock Open Lever
    		*2
    		Grommet


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Turn the fuel filler opening lid lock retainer counterclockwise and remove the fuel lid lock control cable from the fuel filler opening lid lock retainer.



16. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Turn the fuel filler opening lid lock retainer clockwise and remove the fuel filler opening lid lock retainer as shown in the illustration.