Power Outlet Socket Removal
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
REMOVE SWITCH BASE
REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
REMOVE NO. 1 POWER OUTLET SOCKET COVER
Power Outlet Socket -- Removal |
1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.
2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
Text in Illustration*1
| Stopper
|
Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
Text in Illustration*1
| Hinge
|
Detach the 9 claws and guide.
- HINT:
- If the claws are difficult to detach, detach the claws from the back of the switch base.
Disconnect the connectors and remove the switch base.
4. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY |
Using a screwdriver, detach the claw, and remove the No. 1 power outlet socket assembly.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective Tape
|
5. REMOVE NO. 1 POWER OUTLET SOCKET COVER |
Detach the 2 claws and remove the No. 1 power outlet socket cover.