Air Conditioning Panel (For Manual Air Conditioning System) Inspection

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Switch Condition	Specified Condition
1 - 2 - 4 - 5 - 6	OFF	10 kΩ or higher
5 - 6	LO	Below 1 Ω
2 - 5 - 6	LO - M1	Below 1 Ω
2 - 5 - 6	M1	Below 1 Ω
1 - 2 - 5 - 6	M1 - M2	Below 1 Ω
1 - 5 - 6	M2	Below 1 Ω
1 - 4 - 5 - 6	M2 - HI	Below 1 Ω
4 - 5 - 6	HI	Below 1 Ω

Inspect illuminations.

1. Connect the positive (+) lead of the battery to terminal 8 and negative (-) lead to terminal 3. Check that the bulbs illuminate.
   If a bulb does not illuminate, replace it.
   

Check the cooler switch resistance.

1. Using an ohmmeter, measure the resistance and check the results in accordance with the values in the table below.
   

   Standard Resistance:

   Tester Connection	Condition	Specified Condition
   5 - 6	Cooler Switch OFF	10 kΩ or higher
   5 - 6	Cooler Switch ON	Below 1 Ω

   If the result is not as specified, replace the cooler switch.
   

Check the A/C indicator operation.

1. Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 4.
   

2. Push the cooler switch in and check that the indicator lights up.
   

   Standard:

   Indicator lights up
   

   If the result is not as specified, replace the cooler switch.
   

Check the illumination operation.

1. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 1 and check that the bulb illuminates.
   

   Standard:

   Bulb illuminates
   

   If the result is not as specified, replace the cooler switch.
   

   Text in Illustration

   *1	Indicator Light
   *2	Illumination Light
   *a	Component without harness connected (Cooler Switch)
   *b	ON
   *c	OFF