Vehicle Interior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Door Lock. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Wireless Door Lock Control System (For Non-Built-In Type Door Control Receiver) -- Terminals Of Ecu |
| CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY |
| *1 | Integration Relay | - | - |
Disconnect the 2A, 2D, 2L and 2H driver side junction block assembly connectors.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition 2D-9 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω 2D-18 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω 2H-4 (ALTB) - Body ground LG - Body ground Battery power supply Always 11 to 14 V 2L-12 (BECU) - Body ground L - Body ground Battery power supply Always 11 to 14 V 2A-6 (SIG) - Body ground B-Y - Body ground Ignition switch Ignition switch off Below 1 V Ignition switch ON 11 to 14 V - If the result is not as specified, there may be a malfunction on the wire harness side.
- If the result is not as specified, there may be a malfunction on the wire harness side.
Reconnect the 2A, 2D, 2L and 2H driver side junction block assembly connectors.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition 2A-4 (L1) - Body ground L - Body ground - Power window regulator master switch assembly (door control switch) lock input signal
- Driver side door key-linked lock input signal
- Power window regulator master switch assembly (door control switch) locked
- Driver side door key cylinder in lock position
Below 1 V - Power window regulator master switch assembly (door control switch) off
- Ignition switch off, all doors closed and driver side door key cylinder in neutral position
11 to 14 V 2D-2 (RDA) - Body ground V-R - Body ground Door control receiver input signal Ignition switch off, all doors closed and transmitter switch not pressed 11 to 14 V Ignition switch off, all doors closed and transmitter switch pressed Pulse generation 2D-4 (UL1) - Body ground L-W - Body ground - Power window regulator master switch assembly (door control switch) unlock input signal
- Driver side door key-linked unlock input signal
- Power window regulator master switch assembly (door control switch) unlocked
- Driver side door key cylinder in unlock position
Below 1 V - Power window regulator master switch assembly (door control switch) off
- Ignition switch off, all doors closed and driver side door key cylinder in neutral position
11 to 14 V 2D-5 (PRG) - Body ground G-W - Body ground Door control receiver output signal Key inserted in ignition key cylinder → As key pulled out of ignition key cylinder 11 to 14 V → Pulse generation → 11 to 14 V 2D-7 (LSWD) - Body ground L-R - Body ground Door lock position switch input signal Driver side door unlocked Below 1 V Driver side door locked 11 to 14 V 2E-3 (PCTY) - Body ground P - Body ground All door courtesy light switch assemblies input signal Any door open Below 1 V All doors closed 11 to 14 V 2K-10 (ACT-) - Body ground L-Y - Body ground Door lock motor unlock drive output signal (passenger door and rear RH door) Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position Below 1 V Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position 11 to 14 V 2K-11 (ACT+) - Body ground L - Body ground Door lock motor lock drive output signal (passenger door and rear RH door) Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position Below 1 V Power window regulator master switch assembly (door control switch) or driver side door key cylinder in lock position 11 to 14 V 2O-10 (KSW) - Body ground G-Y - Body ground Unlock warning switch input signal No key in ignition key cylinder 10 kΩ or higher Key inserted in ignition key cylinder Below 1 Ω 2O-25 (HAZ) - Body ground G-O - Body ground All hazard warning light output signals Hazard warning signal switch assembly off 11 to 14 V Hazard warning signal switch on assembly Below 1 V 2O-27 (DCTY) - Body ground R-B - Body ground Front door courtesy light switch assembly LH input signal Driver side door open Below 1 V Driver side door closed 11 to 14 V 2R-27 (ACT-) - Body ground L-Y - Body ground Door lock motor unlock drive output signal (driver door and rear LH door) Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position Below 1 V Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position 11 to 14 V 2R-28 (ACT+) - Body ground L - Body ground Door lock motor lock drive output signal (driver door and rear LH door) Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position Below 1 V Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position 11 to 14 V - If the result is not as specified, the driver side junction block assembly may have a malfunction.
- Power window regulator master switch assembly (door control switch) lock input signal