Wireless Door Lock Control System (For Built-In Type Door Control Receiver) How To Proceed With Troubleshooting

Vehicle Interior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Door Lock. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. PROBLEM SYMPTOMS TABLE

  4. OVERALL ANALYSIS AND TROUBLESHOOTING

  5. ADJUST, REPAIR OR REPLACE

  6. CONFIRMATION TEST

Wireless Door Lock Control System (For Built-In Type Door Control Receiver) -- How To Proceed With Troubleshooting


HINT:
  1. The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock control system is operating normally. Check the power door lock control system first before troubleshooting the wireless door lock control system (HILUX_TGN26 RM0000014VK01MX.html).
  2. Use these procedures to troubleshoot the wireless door lock control system.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      1. If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (HILUX_TGN26 RM000004GD0007X.html).

      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B



    		B.
    Go to step 5
    A


    4.OVERALL ANALYSIS AND TROUBLESHOOTING

    1. Terminals of ECU (HILUX_TGN26 RM000000Z4R01HX.html).

    2. Operation check (HILUX_TGN26 RM000004PTL004X.html).


    NEXT


    5.ADJUST, REPAIR OR REPLACE

      NEXT


      6.CONFIRMATION TEST

        NEXT

        END