Rear View Monitor System (For Navigation Receiver Type) How To Proceed With Troubleshooting

Audio Visual Telematics. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Park Assist Monitoring. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. CHECK DTC OF NAVIGATION SYSTEM

  4. PROBLEM SYMPTOM CONFIRMATION

  5. SYMPTOM SIMULATION

  6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM

  7. PROBLEM SYMPTOMS TABLE

  8. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW

  9. ADJUST, REPAIR OR REPLACE

  10. CONFIRMATION TEST

Rear View Monitor System (For Navigation Receiver Type) -- How To Proceed With Troubleshooting


HINT:
Use these procedures to troubleshoot the rear view monitor system.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CHECK DTC OF NAVIGATION SYSTEM

      1. Refer to DTC Check/Clear procedures of the navigation system (HILUX_TGN26 RM0000011BU0IIX.html).

        Result
        Result
        		Proceed to
        DTC is not output
        		A
        DTC is output
        		B



      		B.
      GO TO NAVIGATION SYSTEM
      A


      4.PROBLEM SYMPTOM CONFIRMATION
        Result
        Result
        		Proceed to
        Symptom does not occur
        		A
        Symptom occurs
        		B


      		B.
      Go to step 6
      A


      5.SYMPTOM SIMULATION

        NEXT


        6.CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM

        1. Refer to the navigation system (HILUX_TGN26 RM000002LQ301IX.html).

          Result
          Result
          		Proceed to
          Symptom does not appear
          		A
          Symptom appears
          		B



        		B.
        FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING
        A


        7.PROBLEM SYMPTOMS TABLE

        1. Refer to the problem symptoms table (HILUX_TGN26 RM00000140009BX.html).

          Result
          Result
          		Proceed to
          Fault is not listed in problem symptoms table
          		A
          Fault is listed in problem symptoms table
          		B



        		B.
        Go to step 9
        A


        8.BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW

        1. Terminals of ECU (HILUX_TGN26 RM0000013ZZ08AX.html).


        NEXT


        9.ADJUST, REPAIR OR REPLACE

          NEXT


          10.CONFIRMATION TEST

            NEXT

            END