Audio Visual Telematics. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Navigation Multi Info Display. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - STEREO JACK ADAPTER ASSEMBLY)
NAVIGATION SYSTEM - Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter |
DESCRIPTION
The No. 1 stereo jack adapter assembly sends an external device sound signal to the navigation receiver assembly through this circuit.The sound signal that has been sent is amplified by the navigation receiver assembly, and then is sent to the speakers.
If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the navigation receiver assembly or speakers.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - STEREO JACK ADAPTER ASSEMBLY) |
Disconnect the G152 and z7 navigation receiver assembly connectors.
Disconnect the z1 No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition G152-28 (VAL+) - z1-6 (ALO) Always Below 1 Ω G152-26 (VAR+) - z1-5 (ARO) Always Below 1 Ω G152-27 (VA-) - z1-7 (ASGN) Always Below 1 Ω G152-11 (AGND) - z1-9 (AGND) Always Below 1 Ω G152-25 (ADPG) - z1-8 (AUXO) Always Below 1 Ω z7-2 (US1-) - z1-2 (UDO-) Always Below 1 Ω z7-3 (US1+) - z1-3 (UDO+) Always Below 1 Ω G152-28 (VAL+) - Body ground Always 10 kΩ or higher G152-26 (VAR+) - Body ground Always 10 kΩ or higher G152-27 (VA-) - Body ground Always 10 kΩ or higher G152-11 (AGND) - Body ground Always 10 kΩ or higher G152-25 (ADPG) - Body ground Always 10 kΩ or higher z7-2 (US1-) - Body ground Always 10 kΩ or higher z7-3 (US1+) - Body ground Always 10 kΩ or higher
|
| ||||
| OK | ||
| ||