Back-Up Light Switch -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- ПРЕДОСТЕРЕЖЕНИЕ:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE BATTERY |
Loosen the bolt and nut, and remove the battery clamp.
Remove the battery.
| 3. REMOVE BATTERY TRAY |
| 4. REMOVE PURGE VSV |
 |
Disconnect the purge VSV connector.
Disconnect the wire harness clamp.
Disconnect the 2 purge line hoses from the purge VSV.
Remove the purge VSV from the air cleaner hose.
| 5. REMOVE AIR CLEANER ASSEMBLY |
Disconnect the mass air flow meter connector.
Remove the 2 clamps of the engine wire.
 |
Remove the air cleaner element.
Remove the 3 bolts from the air cleaner case.
 |
Disconnect the air cleaner case from the No. 1 air cleaner inlet.
| 6. REMOVE BATTERY CARRIER |
 |
Disconnect the 2 clamps of the engine wire.
Remove the 4 bolts and No. 1 battery carrier.
Remove the 2 bolts and battery bracket reinforcement.
 |
Remove the 2 bolts, nut and battery carrier bracket.
 |
| 7. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY |
 |
Disconnect the back-up light switch connector.
Remove the back-up light switch and gasket from the transaxle case.