Oil Pump Reassembly

Using SST, install a new oil seal to the pump.

Специальный инструмент (SST):

09350-32014(09351-32140)

УКАЗАНИЕ:

The seal end should be flush with the outer edge of the oil pump.

Coat the lip of the oil seal with petroleum jelly.

Coat a new O-ring with ATF, and install it to the oil pump body.

Coat the front oil pump driven gear with ATF, and install it to the oil pump body with the maked side facing up.

Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the maked side facing up.

Set stator shaft by aligning each bolt hole.

Using a T30 ''torx'' socket, install the 11 bolts.

Момент затяжки:

9.8 Н*м{100 кгс*см, 87 фунт-сила-дюймов}

Install the 2 clutch drum oil seal rings.

Turn the drive gear with 2 screwdrivers and make sure it rotates smoothly.

ПРИМЕЧАНИЕ:

Be careful not to damage the oil seal lip.