Valve Body Assembly Installation

Install the 5 shift solenoid valves with the 5 bolts and 4 plates.

Момент затяжки:

6.6 Н*м{67 кгс*см, 58 фунт-сила-дюймов} for bolt A

11 Н*м{112 кгс*см, 9 фунт-сила-футов} for bolt B

УКАЗАНИЕ:

Each bolt length is indicated below.

Bolt length:

12 mm (0.47 in.) for Bolt A
45 mm (1.77 in.) for Bolt B

Install the spring and check ball body.

Align the groove of the manual valve with the pin of lever.

Install the 17 bolts.

Момент затяжки:

11 Н*м{112 кгс*см, 8 фунт-сила-футов}

ПРИМЕЧАНИЕ:

1. Push the valve body against the accumulator piston spring and the check ball body to install it.
   
2. Tighten the bolts marked by * in the illustration first temporarily because they are positioning bolts.
   

УКАЗАНИЕ:

Each bolt length is indicated below.

Bolt length:

25 mm (0.984 in.) for Bolt A
41 mm (1.614 in.) for Bolt B
45 mm (1.771 in.) for Bolt C

Coat the O-ring with ATF.

Install the ATF temperature sensor with the lock plate and bolt.

Момент затяжки:

6.6 Н*м{67 кгс*см, 58 фунт-сила-дюймов}

Connect the 5 shift solenoid valve connectors.

Coat a new O-ring with ATF.

Install the O-ring to the oil strainer.

Install the oil strainer with the 3 bolts.

Момент затяжки:

11 Н*м{112 кгс*см, 8 фунт-сила-футов}

Install the 3 magnets in the oil pan.

Install a new gasket, oil pan with the 18 bolts.

Момент затяжки:

7.6 Н*м{77 кгс*см, 67 фунт-сила-дюймов}

Inspect the fluid level (see page RAV4_ACA30 RM0000022UI001X.html).

Perform the RESET MEMORY procedures (A/T initialization) (see page RAV4_ACA30 RM000000W7F01AX.html).