Brake Actuator (W/ Abs) Removal

Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake Control Dynamic Control Systems. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. DRAIN BRAKE FLUID

  4. REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET

Brake Actuator (W/ Abs) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (HILUX_TGN26 RM000004QR1006X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3008X.html).


3. DRAIN BRAKE FLUID
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


4. REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Brake Control Dynamic Control Systems.Anti-Lock Brake System.Brake Actuator (W/ Abs) Removal

  1. Place tags or marks to identify the installation locations of each brake line.

    HINT:
    1. *1: to front wheel cylinder RH
    2. *2: to front wheel cylinder LH
    3. *3: to rear wheel cylinder
    4. *4: from master cylinder

  1. Release the latch of the actuator connector and disconnect the connector.

  1. Detach the clip from the brake actuator bracket.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Using a union nut wrench, disconnect the 5 brake lines from the brake actuator.



  1. Remove the 3 bolts and brake actuator with bracket.

    NOTICE:
    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
    Be careful not to damage the brake tubes.