Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake Control Dynamic Control Systems. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Vehicle Stability Control System -- Problem Symptoms Table |
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- NOTICE:
- When replacing the brake actuator assembly, a sensor, etc., turn the ignition switch off.
| Symptom | Suspected Area | See page |
| ABS, BA and/or EBD does not operate | Check for DTCs again and make sure that the normal system code is output | HILUX_TGN26 RM000000XHV0CGX.html |
| IG power source circuit (low power supply voltage malfunction) | HILUX_TGN26 RM000000XW60DJX.html | |
| IG power source circuit (high power supply voltage malfunction) | HILUX_TGN26 RM00000368W04RX.html | |
| Front speed sensor circuit (open or short malfunction) | HILUX_TGN26 RM000000XI90MUX.html | |
| Front speed sensor circuit (output malfunction) | HILUX_TGN26 RM000000XIA0GHX.html | |
| Rear speed sensor circuit (open or short malfunction) | HILUX_TGN26 RM00000369304IX.html | |
| Rear speed sensor circuit (output malfunction) | HILUX_TGN26 RM00000369S04MX.html | |
| Check the brake actuator assembly with the intelligent tester (check brake actuator assembly operation using the Active Test function). If abnormal, check the hydraulic circuit for leaks. | HILUX_TGN26 RM0000011JI00SX.html | |
| If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly) | HILUX_TGN26 RM0000010K0018X.html | |
| ABS, BA and/or EBD does not operate efficiently | Check for DTCs again and make sure that the normal system code is output | HILUX_TGN26 RM000000XHV0CGX.html |
| Front speed sensor circuit (open or short malfunction) | HILUX_TGN26 RM000000XI90MUX.html | |
| Front speed sensor circuit (output malfunction) | HILUX_TGN26 RM000000XIA0GHX.html | |
| Rear speed sensor circuit (open or short malfunction) | HILUX_TGN26 RM00000369304IX.html | |
| Rear speed sensor circuit (output malfunction) | HILUX_TGN26 RM00000369S04MX.html | |
| Stop light switch circuit | HILUX_TGN26 RM000000XIE0IWX.html | |
| Check the brake actuator assembly with the intelligent tester (check brake actuator assembly operation using the Active Test function). If abnormal, check the hydraulic circuit for leaks. | HILUX_TGN26 RM0000011JI00SX.html | |
| If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly) | HILUX_TGN26 RM0000010K0018X.html | |
| ABS sensor DTC check cannot be performed | Check for DTCs again and make sure that the normal system code is output | HILUX_TGN26 RM000000XHV0CGX.html |
| TC and CG terminal circuit | HILUX_TGN26 RM000000XIU0GMX.html | |
| If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly) | HILUX_TGN26 RM0000010K0018X.html | |
| ABS warning light abnormal (Remains on) | Refer to ABS Warning Light Remains ON | HILUX_TGN26 RM000003O4G013X.html |
| ABS warning light abnormal (Does not come on) | Refer to ABS Warning Light does not Come ON | HILUX_TGN26 RM000003O4H013X.html |
| Brake warning light abnormal (Remains on) | Refer to Brake Warning Light Remains ON | HILUX_TGN26 RM000003O4I011X.html |
| Brake warning light abnormal (Does not come on) | Refer to Brake Warning Light does not Come ON | HILUX_TGN26 RM000003O4J011X.html |
| VSC and/or TRC does not operate | Check for DTCs again and make sure that the normal system code is output | HILUX_TGN26 RM000000XHV0CGX.html |
| IG power source circuit (low power supply voltage malfunction) | HILUX_TGN26 RM000000XW60DJX.html | |
| IG power source circuit (high power supply voltage malfunction) | HILUX_TGN26 RM00000368W04RX.html | |
| Check the hydraulic circuit for leaks | - | |
| Front speed sensor circuit (open or short malfunction) | HILUX_TGN26 RM000000XI90MUX.html | |
| Front speed sensor circuit (output malfunction) | HILUX_TGN26 RM000000XIA0GHX.html | |
| Rear speed sensor circuit (open or short malfunction) | HILUX_TGN26 RM00000369304IX.html | |
| Rear speed sensor circuit (output malfunction) | HILUX_TGN26 RM00000369S04MX.html | |
| Yaw rate and acceleration sensor circuit (zero point malfunction) | HILUX_TGN26 RM000000XIK09FX.html | |
| Yaw rate and acceleration sensor circuit (power supply malfunction) | HILUX_TGN26 RM000001RFV0D5X.html | |
| Yaw rate sensor circuit (comparison malfunction) | HILUX_TGN26 RM0000035P5046X.html | |
| Steering angle sensor circuit (zero point malfunction) | HILUX_TGN26 RM000000ZRR0AKX.html | |
| Steering angle sensor circuit (output malfunction) | HILUX_TGN26 RM000000XIM0JOX.html | |
| If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly) | HILUX_TGN26 RM0000010K0018X.html | |
| VSC sensor DTC check cannot be performed | Check for DTCs again and make sure that the normal system code is output | HILUX_TGN26 RM000000XHV0CGX.html |
| TC and CG terminal circuit | HILUX_TGN26 RM000000XIU0GMX.html | |
| If the symptoms still occur even after the above items in the suspected area column have been inspected and proved to be normal, replace the skid control ECU (brake actuator assembly) | HILUX_TGN26 RM0000010K0018X.html | |
| VSC OFF indicator light abnormal (Remains on) | Refer to VSC OFF Indicator Light Remains ON | HILUX_TGN26 RM000003O4M00JX.html |
| VSC OFF indicator light abnormal (Does not come on) | Refer to VSC OFF Indicator Light does not Come ON | HILUX_TGN26 RM000003O4N00JX.html |
| Slip indicator light abnormal (Remains on) | Refer to Slip Indicator Light Remains ON | HILUX_TGN26 RM000003O4K00JX.html |
| Slip indicator light abnormal (Does not come on) | Refer to Slip Indicator Light does not Come ON | HILUX_TGN26 RM000003O4L00JX.html |
| Test Mode (signal check) cannot be performed | TS and CG terminal circuit | HILUX_TGN26 RM000000XIV0C3X.html |
| Skid control ECU (Brake actuator assembly) | HILUX_TGN26 RM0000010K0018X.html |