Anti-Lock Brake System Freeze Frame Data

Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake Control Dynamic Control Systems. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. FREEZE FRAME DATA

  1. CHECK FREEZE FRAME DATA

  1. CLEAR FREEZE FRAME DATA

Anti-Lock Brake System -- Freeze Frame Data



FREEZE FRAME DATA

  1. Whenever a DTC is stored, the skid control ECU (brake actuator assembly) stores the current vehicle state as freeze frame data.

  2. The skid control ECU (brake actuator assembly) stores the number of times (maximum: 31) the ignition switch has been turned from off to ON since the last time the ABS was activated.

    HINT:
    1. If the vehicle is stopped or at a low speed (7 km/ h (4 mph) or less), or if a DTC is stored, the skid control ECU (brake actuator assembly) stops counting the number of times the ignition switch has been turned from off to ON.
    2. Freeze frame data at the time the ABS operates: The skid control ECU (brake actuator assembly) stores and updates data whenever the ABS operates. When the ECU stores data at the time a DTC is stored, the data stored during ABS operation is cleared.
    3. Freeze frame data at the time a DTC is stored: When the skid control ECU (brake actuator assembly) stores data at the time a DTC is stored, no updates are performed until the data is cleared.

CHECK FREEZE FRAME DATA

  1. Turn the ignition switch off.

  2. Connect the intelligent tester to the DLC3.

  3. Turn the ignition switch to ON.

  4. Enter the following menus: Chassis / ABS/VSC/TRC / DTC.

  5. According to the display on the intelligent tester, select the trouble code data display with freeze frame data.

    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Stop Light SW
    		Stop light switch signal/
    ON or OFF
    		ON: Brake pedal depressed
    OFF: Brake pedal not depressed
    		-
    Operated System
    		Operated system status/
    no Sys, ABS, VSC(TRC), BA, HAB, FAIL SAFE, PBA or PB
    		-
    		ABS: ABS operating
    Number of IG ON
    		Number of times ignition switch turned to ON after storing freeze frame data/
    0 to 31
    		-
    		-
    Vehicle Speed
    		Maximum wheel speed sensor value/
    Min.: 0 km/h (0 mph)
    Max.: 326 km/h (202 mph)
    		Actual vehicle speed
    		The speed which was indicated on the speedometer.
    Back And Forth G
    		Forward and rearward gravitational force (G)/
    Min.: -1.86 G
    Max.: 1.85 G
    		-
    		Changes in proportion to acceleration during acceleration/ deceleration.


CLEAR FREEZE FRAME DATA
NOTICE:
Clearing the DTC also clears the freeze frame data.

  1. Clear the DTCs (HILUX_TGN26 RM000000XHV0CFX.html).