Ecm Installation

Install the 2 ECM brackets with the 4 screws.

Момент затяжки:

3.0 Н*м{30 кгс*см, 27 фунт-сила-дюймов}

Connect the 2 ECM connectors.

1. Connect the 2 connectors to the ECM and lower the 2 levers.
   

   ПРИМЕЧАНИЕ:

   Make sure that the 2 levers are securely lowered.

Install the ECM with the 3 bolts.

Момент затяжки:

6.5 Н*м{66 кгс*см, 57 фунт-сила-дюймов}

Install the cleaner case with the 3 bolts and connect the wire harness clamp.

Момент затяжки:

5.0 Н*м{51 кгс*см, 44 фунт-сила-дюймов}

Install the air filter element.

Insert the hinge parts of the air cleaner cap into the air cleaner case, and then hang the 3 hook clamps.

Connect the mass air flow meter connector.

Engage the wire harness clamp.

Attach the 4 clips to install the engine cover.

When the ECM is replacing, all of the existing injector compensation codes and transfer catalyst record of DPNR must be input into the new ECM (see page RAV4_ACA30 RM000000TJ400AX.html).

w/ cruise control
When replacing the ECM, perform vehicle stability control system recognition in ECM (see page RAV4_ACA30 RM00000226C000X.html).