Lexus IS250 IS220d GSE20 ALE20 - LIGHTING
REAR COMBINATION LIGHT ASSEMBLY - REASSEMBLY
| 1. INSTALL REAR LIGHT LENS |
| 2. INSTALL REAR LIGHT SOCKET AND WIRE |
Connect the connector.
Install the rear light socket and wire.
| 3. INSTALL REAR LIGHT BULB |
Install the rear light bulb.
| 4. INSTALL BACK UP LIGHT BULB |
Install the back up light bulb.
| 5. INSTALL REAR COMBINATION LIGHT BODY GASKET |
Remove the release paper from a new rear combination light body gasket.
- NOTICE:
Be sure to remove all the traces of the old gasket from the body.
Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.
| 6. INSTALL REAR COMBINATION LIGHT LENS AND BODY |
| 7. INSTALL REAR LIGHT SOCKET AND WIRE |
Connect the connector and install the rear light socket and wire.
| 8. INSTALL REAR TURN SIGNAL LIGHT BULB |
Install the rear turn signal light bulb.
| 9. INSTALL REAR COMBINATION LIGHT BODY GASKET |
Remove the release paper from a new rear combination light body gasket.
- NOTICE:
Be sure to remove all the traces of the old gasket from the body.
Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.