INSPECT REAR OUTER COMBINATION LIGHT ASSEMBLY

INSPECT REAR INNER COMBINATION LIGHT ASSEMBLY

Disconnect the connector from the rear outer combination light.

Measure the voltage according to the value(s) in the table below.

• Standard voltage:
• LH Side:

• Tester Connection	Condition	Specified Condition
  Q50-2 (STP) - Q50-6 (E)	Brake pedal released	Below 1 V
  Q50-2 (STP) - Q50-6 (E)	Brake pedal depressed	10 to 14 V
  Q50-3 (TL) - Q50-6 (E)	Dimmer switch ON	10 to 14 V
  Q50-3 (TL) - Q50-6 (E)	Dimmer switch OFF	Below 1 V

• RH Side:

• Tester Connection	Condition	Specified Condition
  Q51-2 (STP) - Q51-6 (E)	Brake pedal released	Below 1 V
  Q51-2 (STP) - Q51-6 (E)	Brake pedal depressed	10 to 14 V
  Q51-3 (TL) - Q51-6 (E)	Dimmer switch ON	10 to 14 V
  Q51-3 (TL) - Q51-6 (E)	Dimmer switch OFF	Below 1 V

If the result is not as specified, repair or replace the wire harness or connector.

Disconnect the connector from the rear inner combination light.

Measure the voltage according to the value(s) in the table below.

• Standard voltage:
• LH Side:

• Tester Connection	Condition	Specified Condition
  Q40-1 - Q40-3	Dimmer switch ON	10 to 14 V
  Q40-1 - Q40-3	Dimmer switch OFF	Below 1 V

• RH Side:

• Tester Connection	Condition	Specified Condition
  Q46-1 - Q46-3	Dimmer switch ON	10 to 14 V
  Q46-1 - Q46-3	Dimmer switch OFF	Below 1 V

If the result is not as specified, repair or replace the wire harness or connector.