Cruise Control System -- Road Test |
INSPECT SET SWITCH |
Turn the cruise control main switch on.
Check that the cruise control indicator light in the combination meter assembly illuminates.
Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
- HINT:
- Due to engine limitations, a speed of 200 km/h (125 mph) is not possible.
Push the cruise control main switch to -SET.
After releasing the switch, check that the vehicle cruises at the desired speed.
![]() |
![]() |
INSPECT "+" SWITCH |
Turn the cruise control main switch on.
Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
- HINT:
- Due to engine limitations, a speed of 200 km/h (125 mph) is not possible.
Push the cruise control main switch to -SET.
Check that the vehicle speed increases while the cruise control main switch is pushed to +RES, and that the vehicle cruises at the set speed when the cruise control main switch is released.
Momentarily push the cruise control main switch upward to +RES and immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (tap-up function).
![]() |
![]() |
![]() |
INSPECT "-" SWITCH |
Turn the cruise control main switch on.
Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
- HINT:
- Due to engine limitations, a speed of 200 km/h (125 mph) is not possible.
Push the cruise control main switch to -SET.
Check that the vehicle speed decreases while the cruise control main switch is pushed down to -SET, and that the vehicle cruises at the set speed when the cruise control main switch is released.
Momentarily push the cruise control main switch downward to -SET and immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (tap-down function).
![]() |
![]() |
INSPECT CANCEL FUNCTION (CANCEL SWITCH) |
Turn the cruise control main switch on.
Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
- HINT:
- Due to engine limitations, a speed of 200 km/h (125 mph) is not possible.
Push the cruise control main switch to -SET.
When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
- Depressing the brake pedal
- Pushing the cruise control main switch off
Pulling the cruise control main switch to CANCEL- Moving the shift lever to any position except D or 3
- Depressing the brake pedal
![]() |
![]() |
INSPECT RES (RESUME) SWITCH |
Turn the cruise control main switch on.
Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
- HINT:
- Due to engine limitations, a speed of 200 km/h (125 mph) is not possible.
Push the cruise control main switch to -SET.
Cancel the cruise control system by performing one of the following.
- Depressing the brake pedal
Pulling the cruise control main switch to CANCEL- Moving the shift lever to any position except D or 3
- Depressing the brake pedal
After the cruise control main switch is pushed up to +RES at a driving speed of more than approximately 40 km/h (25 mph), check that the vehicle restores the speed that was set before the cancellation.
![]() |
![]() |
![]() |