Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Kd-Ftv Starting. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Pre-Heating System (W/ Dpf) -- On-Vehicle Inspection |
- NOTICE:
- Turn the ignition switch off for 60 seconds before performing the following inspections.
| 1. INSPECT ILLUMINATION DURATION OF GLOW INDICATOR LIGHT |
Turn the ignition switch to ON and measure the length of time that the light remains illuminated.
- Light illumination duration:
- Refer to the graph
Text in Illustration *a Glow Indicator Light Illumination Time *b Engine Coolant Temperature *c When atmospheric pressure is 100 kPa (1.0 kgf/cm2) - HINT:
- Depending on the engine coolant temperature, the indicator light illumination time changes as shown in the illustration.
 |
| 2. INSPECT PRE-HEATING FUNCTION |
Measure the voltage applied to the glow plugs.
- Standard voltage:
- 11 to 14 V at 25°C (77°F) or less
Measure the length of time that voltage is applied to the glow plugs while the ignition switch is ON.
- Standard Pre-heating Time:
Condition Pre-heating Time Battery voltage at 14.5 V or higher 1 second Engine coolant temperature 40°C (104°F) or higher 1 second Other than above 15 seconds
| 3. INSPECT AFTER GLOW |
Measure the voltage applied to the glow plugs after the engine is started.
- Standard Voltage:
Measurement Condition Specified Condition Engine coolant temperature 20°C (68°F) or less 11 to 14 V Engine coolant temperature 20°C (68°F) to 41°C (106°F) 0 to 14 V Engine coolant temperature 41°C (106°F) or higher 0 V
- HINT:
- The maximum amount of time that voltage is applied to the glow plugs is 20 minutes.