Starter (For Bosch Made) Installation

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
1Kd-Ftv Starting. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSTALL STARTER ASSEMBLY

  2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

  3. INSTALL FRONT FENDER SEAL

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter (For Bosch Made) -- Installation



1. INSTALL STARTER ASSEMBLY

  1. Connect the ground cable and install the starter with the 2 bolts.

    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}

  1. Install the starter wire to terminal 30 with the nut.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}

  1. Connect the starter connector.



2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

  1. Connect the clutch release cylinder assembly with the 2 bolts.

    Torque:
    12 N*m{120 kgf*cm, 9 ft.*lbf}


3. INSTALL FRONT FENDER SEAL

  1. Install the seal with the 5 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3003X.html).