Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
1Kd-Ftv Engine Mechanical. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)
REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)
REMOVE PUMP IMPELLER DRIVE PLATE (for Automatic Transmission)
Rear Crankshaft Oil Seal -- Removal |
| 1. REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission) |
- for 2WD: (HILUX_TGN26 RM0000011B200RX.html)
- for 4WD: (HILUX_TGN26 RM0000011AL00IX.html)
| 2. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission) |
| 3. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission) |
Place matchmarks on the clutch cover and flywheel.
Text in Illustration *1 Matchmark
 |
Loosen each set bolt one turn at a time until spring tension is released.
Remove the 6 set bolts and pull off the clutch cover.
- NOTICE:
- Do not drop the clutch disc.
| 4. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission) |
- NOTICE:
- Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.
| 5. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission) |
Using SST, hold the crankshaft pulley.
- SST
- 09213-58014
09330-00021
 |
Remove the 8 bolts and flywheel.
 |
| 6. REMOVE PUMP IMPELLER DRIVE PLATE (for Automatic Transmission) |
Using SST, hold the crankshaft pulley.
- SST
- 09213-58014
09330-00021
|
Remove the 8 bolts, rear drive plate spacer, pump impeller drive plate and flywheel.
 |
| 7. REMOVE REAR CRANKSHAFT OIL SEAL |
Using a knife, cut off the lip of the rear crankshaft oil seal.
Text in Illustration *1 Cutting Position
 |
Using a screwdriver, pry out the rear crankshaft oil seal.
- NOTICE:
- Be careful not to damage the crankshaft.