THEFT DETERRENT SYSTEM (w/o Intrusion Sensor) - DATA LIST / ACTIVE TEST

DATA LIST

Using the intelligent tester Data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data list early in troubleshooting is one way to shorten labor time.

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Enter the following menus: Main Body / Body or Body No. 5 / Data List.

Read the Data list according to the display on the tester.

Main Body (Main body ECU RH):
Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
Warning by Horn	Warning by horn/ON or OFF	ON: Vehicle horns and security horn sound during alarm sounding state OFF: Vehicle horns and security horn do not sound during alarm sounding state	-
Luggage Courtesy SW	Luggage compartment door courtesy switch/ON or OFF	ON: Luggage compartment door is OPEN OFF: Luggage compartment door is CLOSED	-
IG SW	Ignition switch signal/ON or OFF	ON: Turn the engine switch on (IG) or start OFF: Turn the engine switch off or on (ACC)	-
D Door Courtesy SW	D door courtesy switch/ON or OFF	ON: Driver side door is OPEN OFF: Driver side door is CLOSED	-
P Door Courtesy SW	P door courtesy switch/ON or OFF	ON: Front passenger side door is OPEN OFF: Front passenger side door is CLOSED	-
Rear Door Courtesy SW	Rear door courtesy switch/ON or OFF	ON: Rear door is OPEN OFF: Rear door is CLOSED	-
Rear Lock Position SW	Rear lock position switch/ON or OFF	ON: Rear door is LOCKED OFF: Rear door is UNLOCKED	-
Passenger Lock Position SW	Passenger lock position switch/ON or OFF	ON: Passenger door is LOCKED OFF: Passenger door is UNLOCKED	-

Body No. 5 (Front controller):
Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
Hood Courtesy Switch	Engine hood courtesy switch signal/ON or OFF	ON: Engine hood is OPEN OFF: Engine hood is CLOSED	-

ACTIVE TEST

Performing the intelligent tester Active test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to shorten the labor time. The Data list can be displayed during the Active test.

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Enter the following menus: Main Body / Body or Body No. 5 / Active Test.

Perform the Active test according to the display on the tester.

Theft Deterrent System (W/O Intrusion Sensor) - Data List / Active Test