Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Tr-Fe Engine Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Heated Oxygen Sensor (W/O Secondary Air Injection System) -- Installation |
| 1. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 1) |
Using SST, install the heated oxygen sensor.
- SST
- 09224-00010
- Torque:
- for use without SST:
- 44 N*m{449 kgf*cm, 32 ft.*lbf}
- for use with SST:
- 40 N*m{408 kgf*cm, 30 ft.*lbf}
Text in Illustration *1 Fulcrum Length - HINT:
- Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with a fulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification (HILUX_TGN26 RM000004QR1003X.html).
- Make sure SST and the wrench are connected in a straight line.
 |
Attach the 3 wire harness clamps to the vehicle body.
Connect the heated oxygen sensor connector.