Ecd System (W/ Egr Cooler) How To Proceed With Troubleshooting

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Kd-Ftv Engine Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. CONNECT INTELLIGENT TESTER TO DLC3

  4. CHECK DTC AND FREEZE FRAME DATA*

  5. CLEAR DTC AND FREEZE FRAME DATA*

  6. VISUAL INSPECTION

  7. CONFIRM PROBLEM SYMPTOMS

  8. CHECK DTC*

  9. BASIC INSPECTION

  10. REFER TO PROBLEM SYMPTOMS TABLE

  11. PARTS INSPECTION

  12. IDENTIFY PROBLEM

  13. ADJUST AND/OR REPAIR

  14. CONFIRMATION TEST

Ecd System (W/ Egr Cooler) -- How To Proceed With Troubleshooting


HINT:
*: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CONNECT INTELLIGENT TESTER TO DLC3
        HINT:
        If the display indicates a communication fault with the tester, inspect the DLC3.

      NEXT


      4.CHECK DTC AND FREEZE FRAME DATA*
        HINT:
        Record or print DTCs and freeze frame data if necessary.

      NEXT


      5.CLEAR DTC AND FREEZE FRAME DATA*

        NEXT


        6.VISUAL INSPECTION

          NEXT


          7.CONFIRM PROBLEM SYMPTOMS
            HINT:
            If the engine does not start, first perform the "Check DTC" and "Basic Inspection" procedures below.
            Result
            Result
            		Proceed to
            Malfunction occurs
            		A
            Malfunction does not occur
            		B


          		B.
          SIMULATE SYMPTOMS
          A


          8.CHECK DTC*
            Result
            Result
            		Proceed to
            Trouble code
            		A
            No trouble code
            		B


          		B.
          Go to step 9
          A

          REFER TO DTC CHART


          9.BASIC INSPECTION
            Result
            Result
            		Proceed to
            Malfunctioning parts not confirmed
            		A
            Malfunctioning parts confirmed
            		B


          		B.
          Go to step 11
          A


          10.REFER TO PROBLEM SYMPTOMS TABLE
            HINT:
            1. Refer to Problem Symptoms Table (HILUX_TGN26 RM0000012WF053X.html).
            2. Also, refer to the inspection procedure for the problem symptom.

          NEXT


          11.PARTS INSPECTION

            NEXT


            12.IDENTIFY PROBLEM

              NEXT


              13.ADJUST AND/OR REPAIR

                NEXT


                14.CONFIRMATION TEST

                  NEXT

                  END