REMOVE WINDSHIELD WASHER JAR ASSEMBLY (for Cold Area Specification Vehicles)
REMOVE WINDSHIELD WASHER JAR ASSEMBLY (except Cold Area Specification Vehicles)
Front Bumper (For Hatchback Without Sport Package) -- Disassembly |
| 1. REMOVE HOOD TO FRONT END PANEL SEAL |
Remove the 4 clips.
 |
While peeling off the double-sided adhesive tape, remove the hood to front end panel seal.
| 2. REMOVE RADIATOR GRILLE SIDE MOULDING LH |
Disengage the 4 claws and remove the radiator grille side moulding.
 |
| 3. REMOVE RADIATOR GRILLE SIDE MOULDING RH |
- HINT:
- Use the same procedure as for the LH side.
| 4. REMOVE RADIATOR GRILLE |
Remove the 3 clips.
 |
Disengage the 14 claws and remove the radiator grille.
 |
| 5. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
Disengage the 4 claws, 2 guides and remove the radiator grill (or front panel) emblem.
 |
| 6. REMOVE FRONT BUMPER LOWER COVER |
Disengage the 3 claws and remove the front bumper lower cover.
 |
| 7. REMOVE FRONT BUMPER HOLE COVER |
Disengage the 3 claws and remove the front bumper hole cover.
 |
| 8. REMOVE LOWER NO. 1 RADIATOR GRILLE |
Disengage the 14 claws and remove the lower No. 1 radiator grille.
 |
| 9. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
Disconnect the connector.
Remove the 2 screws.
 |
Disengage the guide to remove the fog light assembly.
| 10. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
- HINT:
- Use the same procedure as for the LH side.
| 11. REMOVE FOG LIGHT COVER LH |
Disengage the 5 claws and remove the fog light cover.
 |
| 12. REMOVE FOG LIGHT COVER RH |
- HINT:
- Use the same procedure as for the LH side.
| 13. REMOVE HEADLIGHT ASSEMBLY LH |
Remove the 3 screws.
 |
Disconnect the connectors and remove the headlight assembly.
| 14. REMOVE HEADLIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure as for the LH side.
| 15. REMOVE FRONT BUMPER SIDE RETAINER LH |
Disengage the 2 claws and remove front bumper side retainer.
 |
| 16. REMOVE FRONT BUMPER SIDE RETAINER RH |
- HINT:
- Use the same procedure as for the LH side.
| 17. SEPARATE THERMISTOR ASSEMBLY |
Disengage the 2 clamps and remove the thermistor.
 |
| 18. REMOVE NO. 2 RADIATOR SIDE AIR SEAL |
Disengage the 2 claws and remove the radiator side air seal.
 |
| 19. REMOVE NO. 1 RADIATOR SIDE AIR SEAL |
- HINT:
- Use the same procedure as for the No. 2 side.
| 20. REMOVE RADIATOR SUPPORT EXTENSION LH |
Disengage the 2 claws and remove the radiator support extension.
 |
| 21. REMOVE RADIATOR SUPPORT EXTENSION RH |
- HINT:
- Use the same procedure as for the LH side.
| 22. REMOVE FRONT BUMPER REINFORCEMENT |
Disengage the 2 clamps and the disconnect the wire harness.
 |
Remove the 6 bolts.
 |
Remove the 4 nuts and the front bumper reinforcement.
| 23. REMOVE FRONT NO. 1 BUMPER STONE DEFLECTOR BRACKET |
Remove the 2 nuts and the front No. 1 bumper stone deflector bracket.
- HINT:
- Use the same procedure as for the opposite side.
 |
| 24. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (for Cold Area Specification Vehicles) |
Remove the bolt and separate the windshield washer jar.
 |
| 25. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (except Cold Area Specification Vehicles) |
Remove the bolt and separate the windshield washer jar.
 |
| 26. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH |
Remove the 4 bolts.
 |
Disengage the 2 guides and remove the front side member bracket.
| 27. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure as for the LH side.