Upper Instrument Panel (For Hatchback) Removal
PRECAUTION
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT DOOR SCUFF PLATE RH (for 5 Door)
REMOVE FRONT DOOR SCUFF PLATE LH (for 5 Door)
REMOVE FRONT DOOR SCUFF PLATE RH (for 3 Door)
REMOVE FRONT DOOR SCUFF PLATE LH (for 3 Door)
REMOVE COWL SIDE TRIM BOARD RH
REMOVE COWL SIDE TRIM BOARD LH
SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)
REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)
REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)
REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)
REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (for Front Passenger Side)
REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
REMOVE COMBINATION METER ASSEMBLY
REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
Upper Instrument Panel (For Hatchback) -- Removal |
- HINT:
- All bolts, screws and nuts relevant to installing and removing the instrument panel are shown, along with their alphabetic codes, in the table below.
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work (YARIS_NCP93 RM00000482L007X.html).
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
3. REMOVE FRONT DOOR SCUFF PLATE RH (for 5 Door) |
Disengage the 8 claws and remove the front door scuff plate.
4. REMOVE FRONT DOOR SCUFF PLATE LH (for 5 Door) |
- HINT:
- Use the same procedure as for the RH side.
5. REMOVE FRONT DOOR SCUFF PLATE RH (for 3 Door) |
Disengage the 8 claws and remove the front door scuff plate.
6. REMOVE FRONT DOOR SCUFF PLATE LH (for 3 Door) |
- HINT:
- Use the same procedure as for the RH side.
7. REMOVE COWL SIDE TRIM BOARD RH |
Remove the clip.
Disengage the clip and remove the cowl side trim board.
8. REMOVE COWL SIDE TRIM BOARD LH |
- HINT:
- Use the same procedure as for the RH side.
9. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
Separate the front door opening trim weatherstrip.
10. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
Separate the front door opening trim weatherstrip.
11. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag) |
Disengage the front pillar garnish clip and the clip.
Text in Illustration*1
| Front Pillar Garnish Clip
|
- HINT:
- The front pillar garnish clip should remain between the front pillar garnish and the pillar.
Using needle nose pliers, turn the front pillar garnish clip 90° and disengage it from the front pillar garnish.
Text in Illustration*1
| Protective Tape
|
- NOTICE:
- As a pillar garnish clip is reusable, do not remove it from the pillar as long as it is not damaged.
- Replace the front pillar garnish clips with new ones if they are removed from the vehicle.
- HINT:
- Tape the needle-nosed pliers tip before use.
Disengage the 2 guides and remove the front pillar garnish.
for 6 speakers:
Disconnect the connector.
Protect the curtain shield airbag assembly.
Text in Illustration*1
| Adhesive Tape
|
*2
| Protective Cover
|
*3
| Curtain Shield Airbag Assembly
|
Cover the airbag with a cloth or piece of nylon and secure the ends of the cover with tape as shown in the illustration.
- NOTICE:
- Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.
12. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) |
- HINT:
- Use the same procedure as for the RH side.
13. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag) |
Disengage the 2 clips and the 2 guides and remove the front pillar garnish.
for 6 speakers:
Disconnect the connector.
14. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) |
- HINT:
- Use the same procedure as for the RH side.
15. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY |
Disengage the 10 clips and the 4 guides and remove the instrument cluster finish panel garnish.
- HINT:
- Disengage the clips in order starting from the outside of the vehicle.
- NOTICE:
- To prevent parts from breaking, do not pull on section A when disengaging the clips.
16. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (for Front Passenger Side) |
Disengage the 3 claws and remove the instrument panel register.
17. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY |
Disengage the 7 clips.
Disconnect the connector and remove the instrument cluster finish center panel.
18. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL |
Disengage the 5 clips and remove the instrument cluster finish panel.
19. REMOVE COMBINATION METER ASSEMBLY |
Remove the 2 screws.
Disengage the 2 clips and the 2 guides.
Disconnect the 2 connectors and remove the combination meter assembly.
20. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
Slide the slider and disconnect the passenger airbag connector.
Text in Illustration*1
| Slider
|
Remove the <B> bolt.
Remove the 2 clips.
Disengage the 8 clips while lifting the rear instrument panel up.
While lifting the instrument panel, slide it toward the rear of the vehicle. Disengage the 5 guides of the front side of the instrument panel and remove the upper instrument panel.
- NOTICE:
- Be careful not to damage the upper instrument panel and steering wheel when removing it.