Front Seat Outer Belt Assembly (For Sedan) Removal

Vehicle Interior. Yaris. Ncp93, 131
Seat Belt. Yaris. Ncp93, 131

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT DOOR SCUFF PLATE

  3. REMOVE REAR DOOR SCUFF PLATE

  4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP

  5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

  6. REMOVE CENTER PILLAR LOWER GARNISH

  7. REMOVE SEAT BELT ANCHOR COVER CAP

  8. REMOVE LAP BELT OUTER ANCHOR COVER

  9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

  10. REMOVE CENTER PILLAR UPPER GARNISH

  11. REMOVE SHOULDER BELT ANCHORAGE PLATE COVER

  12. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

Front Seat Outer Belt Assembly (For Sedan) -- Removal


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (YARIS_NCP93 RM000000KT10D1X.html).
HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.


2. REMOVE FRONT DOOR SCUFF PLATE


    Yaris. Ncp93, 131

  1. Disengage the 11 claws and remove the front door scuff plate.



3. REMOVE REAR DOOR SCUFF PLATE


    Yaris. Ncp93, 131

  1. Disengage the 7 claws and remove the rear door scuff plate.



4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP


    Yaris. Ncp93, 131

  1. Remove the front door opening trim weatherstrip to the extent that the center pillar upper and lower garnishes can be removed.



5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP


    Yaris. Ncp93, 131

  1. Remove the rear door opening trim weatherstrip to the extent that the center pillar upper and lower garnishes can be removed.



6. REMOVE CENTER PILLAR LOWER GARNISH


    Yaris. Ncp93, 131

  1. Disengage the 3 claws and 2 clips and remove the center pillar lower garnish.



7. REMOVE SEAT BELT ANCHOR COVER CAP


    Yaris. Ncp93, 131.Seat Belt.Seat Belt Warning System (For Sedan).Front Seat Outer Belt Assembly (For Sedan) Removal

  1. Pull portion A, shown in the illustration, toward you, remove the 2 claws on the lower side followed by the claw on the upper side. Then remove the seat belt anchor cover cap.



8. REMOVE LAP BELT OUTER ANCHOR COVER


    Yaris. Ncp93, 131

  1. Disengage the 3 claws and remove the lap belt outer anchor cover.



9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


    Yaris. Ncp93, 131

  1. Remove the bolt and the anchor plate.



    Yaris. Ncp93, 131

  1. Remove the bolt and the shoulder anchor.



  1. Disconnect the pretensioner connector.



      Yaris. Ncp93, 131.Seat Belt.Seat Belt Warning System (For Sedan).Front Seat Outer Belt Assembly (For Sedan) Removal

    1. Using a screwdriver, release the locking button.

    2. Using a screwdriver, disconnect the pretensioner connector.



    Yaris. Ncp93, 131

  1. Remove the 2 bolts, the 2 hooks and the retractor.



10. REMOVE CENTER PILLAR UPPER GARNISH


    Yaris. Ncp93, 131

  1. Disengage the 2 clips and 2 hooks and remove the center pillar upper garnish.



11. REMOVE SHOULDER BELT ANCHORAGE PLATE COVER


    Yaris. Ncp93, 131

  1. Disengage the 2 claws and remove the shoulder belt anchorage plate cover.



12. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


    Yaris. Ncp93, 131

  1. Remove the 2 bolts, the hook and the front shoulder belt anchor adjuster.