Supplemental Restraint Systems. Front Seat Side Airbag Assembly (For Sedan) Disposal

Vehicle Interior. Yaris. Ncp93, 131

Supplemental Restraint Systems. Yaris. Ncp93, 131

DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)
DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

Front Seat Side Airbag Assembly (For Sedan) -- Disposal

HINT:

Disposal procedure for the RH side is the same as that for the LH side.
The procedure described below is for the LH side.
When scrapping a vehicle equipped with the SRS or disposing of the front seat side airbag, deploy the airbag first in accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of the DISTRIBUTOR.

CAUTION:

Never dispose of a front seat side airbag that has an undeployed airbag.
The airbag emits an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to nearby residents.

When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical noise.
When deploying the airbag, perform the operation at least 10 m (33 ft) away from the airbag.
The front seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
Use gloves and safety glasses when handling a front seat side airbag which has been deployed.
Always wash your hands with water after completing the operation.
Do not apply water, etc. to a front seat airbag which has been deployed.

1. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

HINT:

Prepare a battery as the power source to deploy the airbag.

Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Seat Side Airbag Assembly (For Sedan) Disposal

Check the function of SST.
SST
09082-00700
CAUTION:
Always use the specified SST (SRS Airbag Deployment Tool) when deploying the airbag.
1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
2. Press the SST activation switch, and check that the LED of the SST activation switch illuminates.
  CAUTION:
  1. Do not connect the SST connector (yellow colored one) to the airbag.
  2. If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Do not to use SST.
3. Disconnect SST from the battery.

Disconnect the cable from the negative battery terminal.

Remove the connector clamp.

Disconnect the airbag connector, as shown in the illustration.
NOTICE:
Do not damage the airbag wire harness when handling the airbag connector.

Connect SST.
SST
09082-00700
09082-00810
1. Connect the SST connector to the front seat side airbag.
  NOTICE:
  Do not lock the secondary lock of the twin lock to avoid damaging SST connector and wire harness.
2. Move SST to at least 10 m (33 ft) away from the vehicle.
3. Close all doors and windows of the vehicle.
  NOTICE:
  Do not damage the SST wire harness.
4. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

Deploy the airbag.
1. Check that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.
2. Press the SST activation switch and deploy the airbag.
  CAUTION:
  1. Make sure that no one is near the vehicle when deploying the airbag.
  2. The front seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
  3. Use gloves and safety glasses when handling a front seat side airbag which has been deployed.
  4. Do not apply water, etc. to a front seat side airbag which has been deployed.
  5. Always wash your hands with water after completing the operation.
  HINT:
  The airbag is deployed as the LED of the SST activation switch illuminations.

2. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

SST: 09082-00700
09082-00760

NOTICE:

Never use the customer's vehicle to deploy the airbag when disposing of a front seat side airbag.
Follow the procedure detailed below when deploying the airbag.

HINT:

Prepare a battery as the power source to deploy the airbag.

Check the function of SST.
SST
09082-00700
CAUTION:
Always use the specified SST (SRS Airbag Deployment Tool) when deploying the airbag.
1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
2. Press the SST activation switch, and check that the LED of the SST activation switch illuminates.
  CAUTION:
  1. Do not connect the SST connector (yellow colored one) to the airbag.
  2. If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Do not use SST.
3. Disconnect SST from the battery.

Remove the front seat side airbag (YARIS_NCP93 RM000002AK700CX.html).

Using a service-purpose wire harness for the vehicle, tie the front seat side airbag.
Stripped wire harness section:
Area
Measurement
A
1.25 mm² or more (0.0019 in.² or more)
HINT:
To calculate the area of the stripped wire harness cross section:
Area = 3.14 x (Diameter)² divided by 4
CAUTION:
Do not use wire harness that is too thin or any other object to tie the front seat side airbag because it may snap due to the shock when the airbag is deployed. Always use a wire harness for vehicle use with a cross section of at least 1.25 mm² (0.0019 in²).
1. Install the 2 nuts onto the front seat side airbag.
2. Wind the wire harnesses around the stud bolts of the front seat side airbag, as shown in the illustration.
3. Position the front seat side airbag inside the tire, as shown in the illustration.
  Tire size:
  Area
  Measurement
  A
  185 mm (7.28 in.)
  B
  360 mm (14.17 in.)
  CAUTION:
  1. Make sure that the wire harnesses are tight. If there is any slack in the wire harnesses, the front seat side airbag may become loose due to the shock when the airbag is deployed.
  2. Always tie the front seat side airbag with the airbag deployment direction facing inside the tire.
  NOTICE:
  The tire will be marked by the airbag deployment, so use a waste tire.

Stripped wire harness section:
Area	Measurement
A	1.25 mm² or more (0.0019 in.² or more)

Tire size:
Area	Measurement
A	185 mm (7.28 in.)
B	360 mm (14.17 in.)

Connect SST.
1. Connect the SST connector to the front seat side airbag connector.

Place the tires.
1. Place at least 2 tires under the tire to which the front seat side airbag is tied.
2. Place at least 2 tires over the tire to which the front seat side airbag is tied. The disc wheel should be installed onto the top tire.
  NOTICE:
  Do not place the SST connector under the tire because it could be damaged.
3. Tie the tires together with 2 wire harnesses.
  CAUTION:
  Make sure that the wire harnesses are tight. It is highly dangerous when a loose wire harness results in the tires coming free due to the shock when the airbag is deployed.

Install SST.
1. Connect the SST connector.
  NOTICE:
  Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness. Also, secure some slack for the SST wire harness inside the tire.

Deploy the airbag.
1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
2. Check that no one is within a 10 m (33 ft) radius of the tire to which the front seat side airbag is tied.
3. Press the SST activation switch and deploy the airbag.
  CAUTION:
  Make sure that no one is near the tires when deploying the airbag.
  HINT:
  The airbag is deployed as the LED of the SST activation switch illuminates.

Dispose of the front seat side airbag.
CAUTION:
1. The front seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
2. Use gloves and safety glasses when handling a front seat side airbag which has been deployed.
3. Always wash your hands with water after completing the operation.
4. Do not apply water, etc. to a front seat side airbag which has been deployed.
1. Remove the front seat side airbag from the tire.
2. Place the front seat side airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.