Door Control Receiver (For Sedan) -- Removal |
| 1. REMOVE REAR SEAT CUSHION PAD ASSEMBLY |
Hold the front edge of the rear seat cushion cover pad and lift it up, as shown in the illustration, to disengage the 2 hooks.
- NOTICE:
- Hold the area around the hooks so as to avoid deforming the rear seat cushion frame.
 |
Pass the rear seat inner belt through the slit in the rear seat cushion cover pad, disengage the hook between the rear seat cushion cover pad and the rear seatback, and remove the rear seat cushion cover pad.
| 2. REMOVE REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type LH Side) |
Remove the rear seat outer belt from the rear seat shoulder belt guide.
 |
Pull the rear seatback lock release button and tilt the rear seatback forward.
Using a clip remover, remove the 2 clips and the rear seatback cover.
 |
Remove the 2 bolts, the 2 hooks and the rear seatback.
 |
| 3. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type) |
 |
Remove the rear seat outer belt from the rear seat shoulder belt guide.
- HINT:
- Use the same procedure for both sides.
Remove the rear center seat outer belt from the rear center seat shoulder belt guide.
Remove the 3 bolts.
 |
Disengage the 3 hooks and remove the rear seatback.
| 4. REMOVE REAR DOOR SCUFF PLATE LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189I062X_02_0103.html).
| 5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189I062X_02_0105.html).
| 6. REMOVE REAR SEAT SIDE COVER LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189I062X_02_0110.html).
| 7. REMOVE ROOF SIDE INNER GARNISH LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM00000189I062X_02_0112.html).
| 8. REMOVE DOOR CONTROL RECEIVER |
Disconnect the connector.
 |
Remove the bolt and remove the door control receiver.