Wireless Door Lock Control System (For Hatchback) Operation Check

This wireless door lock control function operates only when the following 3 conditions are met:

1. There is no key in the ignition key cylinder.
   

2. The power door lock system is functioning normally.
   

3. The function is not disabled by customization.
   

The operating range differs depending on the situation.

1. The operating range differs depending on the user, the way the transmitter is held and the location.
   

2. In certain areas, the operating range will be reduced due to the vehicle body shape and the influence of the surrounding environment.
   

3. The transmitter's faint electric waves may be affected if the area has strong electric waves or noise. The transmitter's operating range may be reduced or the transmitter may not function.
   

4. When the battery weakens, the operating range is reduced or the transmitter may not function.
   

   HINT:

   If the transmitter has had prolonged exposure to direct sunlight, such as being left on the instrument panel, the battery may weaken or other problems may occur.

Make sure that the vehicle is in a condition in which the wireless control functions can be operated (see above).

Check the chattering prevention function.

1. When a switch is pressed, check that the corresponding operation occurs only once. When the switch is held down, check that the corresponding operation occurs only once and does not repeatedly activate. When the switch is pressed at 1-second intervals, check that the corresponding operation activates once for each press of the switch.
   

Check the automatic locking function.

1. When all doors are unlocked with the unlock switch and none of the doors are opened or locked within 60 seconds, check that the doors are relocked automatically.
   

Check the switch operation fail-safe function.

1. If the key is in the ignition key cylinder, check that the doors cannot be locked by the lock switch. However, this does not apply when the system is in recognition code registration mode.
   

Check the answer-back function.

1. When the lock switch is pressed, check that the hazard warning lights flash once and all doors are locked.
   

2. When the unlock switch is pressed, check that the hazard warning lights flash twice and all doors are unlocked.
   

Check the panic alarm control function (YARIS_NCP93 RM0000026P004TX.html).

Check the illuminated entry function.

1. When all doors are locked and the unlock switch is pressed, check that the map light illuminates (when the light switch is in the DOOR position) and all doors are unlocked.