Vehicle Interior. Yaris. Ncp93, 131
Door Lock. Yaris. Ncp93, 131
Power Door Lock Control System (For Sedan) -- Data List / Active Test |
| READ DATA LIST |
- HINT:
- Using a Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect a Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on tester, read on the "Data List".
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| D Door Courtesy SW | Driver side door courtesy switch signal/ ON or OFF | ON: Driver side door is open OFF: Driver side door is closed | - |
| D-Door Lock Pos SW | Driver side door lock position switch signal/ ON or OFF | ON: Driver side door is unlocked OFF: Driver side door is locked | - |
| Door Lock SW-Lock | Door manual lock switch signal/ ON or OFF | ON: Door control switch (for front driver door side) is turned to lock position OFF: Door control switch (for front driver door side) is turned to unlock position | - |
| Door Lock SW-Unlock | Door manual unlock switch signal/ ON or OFF | ON: Door control switch (for front driver door side) is turned to unlock position OFF: Door control switch (for front driver door side) is turned to lock position | - |
| Door Key SW-Lock | Door key linked lock switch signal/ ON or OFF | ON: Driver side door key cylinder is turned to lock position OFF: Driver side door key cylinder is turned to unlock position | - |
| Door Key SW-Unlock | Door key linked unlock switch signal/ ON or OFF | ON: Driver side door key cylinder is turned to unlock position OFF: Driver side door key cylinder is turned to lock position | - |
| D Door Key SW-UL | Driver side door key linked unlock switch signal/ ON or OFF | ON: Driver side door key cylinder is turned to unlock position OFF: Driver side door key cylinder is turned to lock position | - |
| P Door Courtesy SW | Passenger side door courtesy switch signal/ ON or OFF | ON: Passenger side door is open OFF: Passenger side door is closed | - |
| P-Door Lock Pos SW | Passenger side door lock position switch signal/ ON or OFF | ON: Passenger side door is unlocked OFF: Passenger side door is locked | - |
| RR Door Courtesy SW | Rear door RH courtesy switch signal/ ON or OFF | ON: Rear door RH is open OFF: Rear door RH is closed | - |
| RL Door Courtesy SW | Rear door LH courtesy switch signal/ ON or OFF | ON: Rear door LHis open OFF: Rear door LH is closed | - |
| Key Unlock Warning SW | Unlock warning switch signal/ ON or OFF | ON: Key is in ignition key cylinder OFF: No key is in ignition key cylinder | - |
| PERFORM ACTIVE TEST |
- HINT:
- Using a Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect a Techstream to the DLC3.
Turn the ignition switch ON.
Turn the tester on.
Enter the following menus: Body Electrical / Main Body / Active Test.
According to the display on tester, perform the "Active Test".
Main Body: Tester Display Test Part Control Range Diagnostic Note Door Lock Operate door lock motor LOCK/UNLOCK LOCK or UNLOCK - D-Door Unlock Operate driver door lock motor unlock side ON/OFF UNLOCK -