REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type)
REMOVE SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type)
REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type)
Amplifier Antenna (For Sedan) -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
2. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
for 60/40 Split Seat Type:
Remove the rear seat cushion cover pad sub-assembly (YARIS_NCP93 RM0000026GD00WX_01_0003.html).
for Fixed Seat Type:
Remove the rear seat cushion cover pad sub-assembly (YARIS_NCP93 RM000001GM000YX_02_0009.html).
3. REMOVE REAR SEATBACK ASSEMBLY |
for 60/40 Split Seat Type:
Remove the rear seatback assembly (YARIS_NCP93 RM0000026GL00WX_01_0002.html).
for Fixed Seat Type:
Remove the rear seatback assembly (YARIS_NCP93 RM000001GM000YX_02_0013.html).
4. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) |
![]() |
Remove the luggage compartment floor mat.
5. REMOVE SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type) |
![]() |
Remove the spare wheel cover.
6. REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) |
![]() |
w/ Grand Spare Tire:
Remove the luggage compartment trim inner pad.
w/o Grand Spare Tire:
Remove the luggage compartment trim inner pad.
![]() |
7. REMOVE REAR DOOR SCUFF PLATE |
Disengage the 7 claws and remove the rear door scuff plate.
![]() |
8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP |
Remove the rear door opening trim weatherstrip.
![]() |
9. REMOVE REAR SEAT SIDE COVER |
Disengage the 2 clips and the 4 claws and remove the rear seat side cover.
![]() |
10. REMOVE ROOF SIDE INNER GARNISH |
w/ Curtain Shield Airbag:
- NOTICE:
- Replace the special clip with a new one when the roof side inner garnish is removed.
Disengage the 4 clips and the claw and remove the roof side inner garnish.
![]() |
w/o Curtain Shield Airbag:
Disengage the 4 clips and the claw and remove the roof side inner garnish.
![]() |
11. REMOVE AMPLIFIER ANTENNA ASSEMBLY |
Disconnect the antenna cord connector.
![]() |
Disconnect the 2 amplifier antenna connectors.
Disengage the clamp.
Remove the bolt and the amplifier antenna.