Front Door Speaker (For Sedan) Installation

Using an air riveter or hand riveter, install the front No. 1 speaker with 3 new strike rivets.

HINT:

Install the new strike rivets in the order shown in the illustration.

NOTICE:

1. Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
   


2. Confirm that the rivets are seated properly against the speaker.
   
3. Do not tilt the riveter when installing the rivet onto the speaker.
   
4. Do not leave any space between the rivet head and speaker.
   


5. Do not leave any space between the speaker and door. Firmly hold the 2 items together while installing the rivet.
   

Connect the speaker connector.

w/ Power window:

1. Connect the front door lock remote control cable and front door inside locking cable.
   





2. Engage the 9 clips and install the front door trim board.
   





3. Tighten the screw.
   

w/o Power window:

1. Connect the front door lock remote control cable and front door inside locking cable.
   





2. Engage the 9 clips and install the front door trim board.
   





3. Tighten the screw.
   

for Driver side with power window:

1. Connect the connector.
   

2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.
   

3. Tighten the screw.
   

for Front passenger side with power window:

1. Connect the connector.
   

2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.
   

3. Tighten the screw.
   

w/o Power window:

1. Engage the 5 clips and 2 clips and install the front armrest base upper panel.
   

2. Tighten the screw.
   

Engage the claw and clip and install the front door lower frame bracket garnish.

Install the window regulator handle plate.

Open all the windows.

Install the front door window regulator handle with the clip at the angle shown in the illustration.