Tire And Wheel System (For Sedan) Inspection

Suspension. Yaris. Ncp93, 131
Tire Wheel. Yaris. Ncp93, 131

  1. INSPECT TIRES

  2. ROTATE TIRES

  3. INSPECT WHEEL BALANCE

  4. INSPECT FRONT AXLE HUB BEARING

  5. INSPECT REAR AXLE HUB BEARING

Tire And Wheel System (For Sedan) -- Inspection



1. INSPECT TIRES

  1. Check the tires for wear and proper inflation pressure.

    Cold Tire Inflation Pressure:

    Tire Size
    		Vehicle Speed
    		Front
    kPa (kgf/cm2, psi)
    		Rear
    kPa (kgf/cm2, psi)
    P175/65R14 81S
    		Driving below
    160 km/h (100 mph)
    		220 (2.2, 32)
    		220 (2.2, 32)
    P185/60R15 84T
    175/65R14 82T
    185/60R15 84H


    Yaris. Ncp93, 131

  1. Using a dial indicator, check the tire runout.

    Tire Runout:
    Vertical
    		1.4 mm (0.0551 in.) or less
    Lateral
    		2.0 mm (0.0787 in.) or less


2. ROTATE TIRES


HINT:
Rotate tires as shown in the illustration.


Yaris. Ncp93, 131.Tire Wheel.Tire And Wheel System (For Sedan).Tire And Wheel System (For Sedan) Inspection


Text in Illustration
*A
for USA, Canada
*B
for Mexico
*C
for Puerto Rico
-
-
*a
Front of Vehicle
-
-


3. INSPECT WHEEL BALANCE


  1. Check and adjust the off-car balance.



      Yaris. Ncp93, 131

    1. Steel wheel

      Maximum imbalance after adjustment:
      8.0 g (0.0176 lb)


      2. Yaris. Ncp93, 131.Tire Wheel.Tire And Wheel System (For Sedan).Tire And Wheel System (For Sedan) Inspection

    2. Others (Non-steel wheel)

      Maximum imbalance after adjustment:
      8.0 g (0.0176 lb)
      NOTICE:
      1. Remove dirt, oil and water from the balance weight surface with cleaning detergent.
      2. Do not touch the adhesive part of the balance weight.
      3. Adhere the sticking type balance weight to the flat surface (A) shown in the illustration.
        Width (A):
        25 mm (0.984 in.)
      4. Push the balance weight securely with a finger to adhere it to the position.
      5. Do not reuse the balance weight.
      HINT:
      The inner side balance weight should be installed by clipping it to the rim.

  1. If necessary, check and adjust the on-car balance.

    Imbalance after adjustment:
    8 g (0.018 lb) or less


4. INSPECT FRONT AXLE HUB BEARING

  1. Inspect the front axle hub bearing (YARIS_NCP93 RM000001IWW03MX.html).



5. INSPECT REAR AXLE HUB BEARING

  1. Inspect the rear axle hub bearing (YARIS_NCP93 RM000001IWW03NX.html).